Ma Fixture Builder 1.5 - 8 facets prism

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Ma Fixture Builder 1.5 - 8 facets prism

      Hi,
      I have an moving head with an 8 facets prism, is there any chance to get all 8 to see or is the ma3d and fixture builder somehow limited to show only 3 beams? The head is a HI-LTTE 2R Beam.
      Oh and how about split colors is that possible?
      Tim
    • Multiple facets of the PRISM1 attribute are possible, even within the same fixture. That can be visualized in MA3D. PRISM1 attribute needs a wheel with the bitmap image of the facets to reference. Then additional assignment statements are needed in the function set as well. This is how it's visualize in MA3D.

      Split COLOR1 attribute, while available in the real world fixture, are not able to be visualized in MA3D.

      Seems to me, ahem, the Devs could hack this in. Allow the COLOR1 attribute wheel to reference bitmap images like the GOBO1, et al do at the present time. You could then have the split bitmaps called as a gobo is...seems doable to Rexy, it does...line 500 of the Wish List. Since they're on a wheel physically and that's how the 'split' is achieved, easy-peasy to generate the textures needed.

      Good luck

      Here's a simple example:

      XML Source Code

      1. <ChannelType index="12" attribute="PRISMA1" feature="BEAM1" preset="BEAM" coarse="15" snap="true">
      2. <ChannelFunction index="0" from="0" to="50" min_dmx_24="0" max_dmx_24="8388607" wheel="4" subattribute="EFFECTWHEELSELECT" subattribute_user_name="Select" attribute="EFFECTWHEEL" attribute_user_name="E" feature="EFFECT" feature_user_name="Effect" preset="BEAM" preset_user_name="Beam">
      3. <ChannelSet index="0" name="open" from_dmx="0" to_dmx="127" slot_index="0" slot_from="0" slot_to="0"/>
      4. </ChannelFunction>
      5. <ChannelFunction index="1" from="50" to="100" min_dmx_24="8388608" max_dmx_24="16777215" physfrom="8" physto="8" physadditional="4" wheel="4" subattribute="PRISMA1" subattribute_user_name="Prism1" attribute="PRISMA1" attribute_user_name="Prism1" feature="BEAM1" feature_user_name="Beam" preset="BEAM" preset_user_name="Beam">
      6. <ChannelSet index="0" name="4+1 facet prism" from_dmx="128" to_dmx="255" slot_index="1" slot_from="0" slot_to="0"/>
      7. </ChannelFunction>
      8. </ChannelType>

      The key to the 'number' of facets is the "physadditional=" assignment statement. You need this number to match the bitmap image[4-facet image] you reference on the EFX Wheel you generate. Bad part is that the Fixture Builder v1.5 still does not have the EFX Wheel in the Wheel Wizard dialog[I believe the 3-facet is a 'default' of PRISM1], at least I couldn't find it. Notice the "wheel='4'" assignment as well; this references the wheel block of code lower in the profile:--the bitmap is really what you're going to visualize, you could call it anything in the function set data above...me thinks, ;).

      XML Source Code

      1. <Wheel index="3" subattribute="PRISMA1" attribute="PRISMA1" feature="BEAM1" preset="BEAM">
      2. <Slot index="0" media_name="open"/>
      3. <Slot index="1" media_name="4+1 facet prism" media_filename="carallon/effects/generic/000900005.png"/>
      4. </Wheel>
      You will need both of these code blocks in sync to successfully get the proper visualization in MA3D.

      Hope this helps. Cheers! Good luck!

      Rex
    • AHA! It seems you can hack a 'split-color' wheel into MA3D....you just have your COLOR1 attribute reference a GOBO1 subattribute, FTW! Then you need to create a GOBO1[or GOBO2 if there is an existing GOBO1 subattribute] wheel dedicated to your split bitmaps you need to generate per your fixture's requirements...

      ...nice to know the hack-duggery still works!
      Images
      • SPLIThack.png

        164.58 kB, 1,258×891, viewed 55 times