Search Results

Search results 1-20 of 257.

  • Only tilt

    Lars - - the dot2 Forum

    Post

    If you want to have the dimmer open all the time then you can activate the dimmer value and store it on a separate executor or simply the same one you've used for your effect. Cheers, Lars

  • Moin, also zu deinem ersten Punkt muss ich sagen habe ich so irgendwie keine richtige Idee... Kannst du uns sagen welche Art von Fixture Ihr verwendet habt? Oder noch besser kannst du uns deine Show an support@ma-dot2.com schicken? zu 2. Schau dir mal die Align Funktion an: help2.malighting.com/Topic/653…cd-4065-b918-bef12958ceb3 Ich denke das kommt der "Fan" Funktion am nächsten. zu 3. "Suck" an sich gibt es in der MA Welt nicht. Dafür verschiedene andere Befehle...das was der "Suck" Funktion a…

  • Only tilt

    Lars - - the dot2 Forum

    Post

    The only thing you need to do is to set the phase to zero and choose center- and size value so that the fixtures move from straight down to the tilt value you like! DONE!

  • How to Import effect?

    Lars - - the dot2 Forum

    Post

    Hey @ohbalin, it is not possible to import any effects into the dot2 software. You can create custom effects with the help of the internal predfined effects and store them as presets into the corresponding preset pool. These effect presets can be used for further programming! Cheers, Lars

  • External DMX

    Lars - - the dot2 Forum

    Post

    Hey, unfortunately this is not possible...to control a cue you need to store it first. A direct access to DMX channel of the console is also not possible. Sorry! Lars

  • Hmmm are you talking about a master which can work as a limiter for different exec buttons? Unfortunetaly this would be a function which doesn't exist in dot2...sorry. Cheers, Lars

  • don't hit yourself too hard! The important thing is that it works now!

  • Did you try to reboot your computer after you've disabled the firewall? We had cases in the past where the changes only became active after a complete reboot of the pc... To be honest I don't have any further ideas...what about contacting our distributor Ambersphere. Chrissy has written this document and recommended the node. Maybe she know a little tick to get it working!? Cheers, Lars

  • Quote from Callum_Jack: “When you say advance settings do you mean in MA Dot2 or on Windows ?? And could you let me know how I can access these settings ?? I have also tried the SetIP command if that’s what you mean but that just didn’t work when I run the command ” I meant the advanced settings of the windows network adapter settings. So just press "Advanced..." in the "Internet Protocol Versions 4 (TCP/IPv4) Properties" menu. Maybe there is a second IP adress assigned to that adapter. SetIP is…

  • The easiest way is to store the effect either on button executor or on executor fader. Then you can use the dedicated fade and off times or the master fader. If you want to limit the output of an effect preset, which is running in the programmer, than you can use a Groupmaster. For more details please check the online help. I've enclosed a showfile which shows all possibilities mentioned above. Cheers, Lars

  • Hi Jack, on the last picture you've uploaded we can see that the onPC is using 192.168.0.2 as sACN adress. The node uses 192.168.1.201. With this configuration the devices can't talk to each other. Please check, if there are any additional IP adresses assigned to the network adapter (advanced settings). Everything else of your configuration should be fine! Cheers, Lars

  • dot2 3D

    Lars - - the dot2 Forum

    Post

    Yes, this is possible, but only as PNG. With the shortcut CTRL+P you can create a simple screenshot from the view which you've actually selected. I guess with some software tools you can also convert it as PDF... Cheers, lars

  • dot2 3D

    Lars - - the dot2 Forum

    Post

    Hey Yaneck, we don't have any reports about issues with .3ds imports. So I assume that the import works as expected! In this part of the manual you can read more about .3ds files and the importer: help2.malighting.com/Topic/9fa…42-430b-9591-1f54cd6afcc7 Cheers, Lars

  • Artnet Merge

    Lars - - deutschsprachiges dot2 Forum

    Post

    Moin Zusammen, erstmal die weniger schöne Nachricht vorab...die dot2 kann nicht intern Mergen. Das bedeutet das du das Signal nicht einfach durch deine Konsole auf dein System schleifen kannst. Hier hilft in der Tat nur das harte Umstecken bzw. das Abschalten deines Art-Net Outputs wenn der Gastoperator das System übernehmen soll. Es gibt allerdings Nodes sowohl für Art-net als auch sACN die, die Signale zweier Quellen mergen können. Vielleicht ist das eine Hilfe für die nächste Festival Saison!…

  • IPv6 zwei PCs

    Lars - - deutschsprachiges dot2 Forum

    Post

    Hey Technix, im Grunde musst du nur darauf achten, dass du in beiden onPCs den richtigen Netzwerk-Adapter auswählst. Wir empfehlen die Verbindung immer über Kabel und nicht WLAN herzustellen. Die Kommunikation beider PCs funktioniert dann über das dot2-Net Protokoll, welches auf IPv6 basiert. Außerdem könnte es sein, dass ein Switch oder Router zwischen beiden PCs die Verbindung blockiert!? Hier in der Hilfe findest du alle weiteren Details wie du dein Netzwerk Setup aufsetzen kannst. Ich hoffe …

  • More than 2 Prisms

    Lars - - dot2 Fixture share

    Post

    Dear @Marekvac, if you still struggle with the Fixture Type you can also contact your local MA distributor. The support department is happy to assist you! You can find the list of distributors here: malighting.com/en/company/ma-worldwide.html Cheers, Lars

  • Fixture Builder Tutorials

    Lars - - dot2 Fixture share

    Post

    Hallo Zusammen, Hey everybody, in der letzten Zeit haben uns viele Anfragen zu Multi-Instanz Fixtures und dem Fixture Builder erreicht. Daher hier eine kleine Zusammenfassung was man beachten muss. in the last couple of days we got a lot of questions about Multi-Instance Fixtures and how to create them with the Fixture Builder. Therefore I've written a little summary of what you need to know. Erstmal ein kleiner Überblick über die Programm-Oberfläche: First of all a littel overview about the pro…

  • [request] American DJ Pocket Pro

    Lars - - dot2 Fixture share

    Post

    Please have a look here: fixtureshare.malighting.com/apis/downloadFile.php?id=20355 Cheers, Lars

  • Hi Stan, leider bietet die dot2 keine Funktion in dieser Richtung.... Ich glaube jeder versteht das du damit effizienter arbeiten willst und nicht daran denkst Daten von jemand anderem zu "klauen". Was du evlt. mal gehört haben könntest ist die Funktionsbeschreibung von "Partial Show Read" aus der grandMA2. Diese Funktion macht prinzipiell nämlich genau das was du möchtest. Grüße, Lars

  • Cue List View

    Lars - - the dot2 Forum

    Post

    Shortcuts are already on the wishlist