Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • WilliamMiller -

    Replied to the thread Dot 2 on pc with remote app IPad.

    Post
    This is not a big deal and there is a fix. For mostiPad model, connect the computer and the node with the LAN to one of the router's LAN ports.
  • Nightscribe -

    Liked Michael’s post in the thread dot2 Tips+Tricks No.51 [EN] about groupmasters.

    Like (Post)
    Hello everybody out there! In this Tips and tricks clip we talk about the use of grandmasters. How to get them, what to use them for and a bit of finetuning them, completes this clip. Check it out! Cheers, Qincy youtube.com/watch?v=aUyrJ66EUb4
  • Nightscribe -

    Replied to the thread LTP/HTP.

    Post
    HTP is great for conventional lighting because you don’t really have a need control any other parameter besides intensity- which has a definite higher and lower. LTP is need to control parameters such as color wheels, gobo spin, etc. These parameters…
  • Nightscribe -

    Liked Lars’s post in the thread LTP/HTP.

    Like (Post)
    Hey, HTP was never part of the dot2 software...it is a wish on our wishlist, but was never implemented so far. Cheers, Lars
  • Nightscribe -

    Liked Push’s post in the thread timecode on dot 2.

    Like (Post)
    Try to us the LTC-in
  • Nightscribe -

    Replied to the thread Mal was generelles zum Thema "Wünsche".

    Post
    Hope it is soon. I understand you need to do it right, but the dot2 usually has a very long update waiting period. Now that the GrandMA3 is going, attention can be turned back to the dot2 for awhile. Been living with these bugs (like the encoder…
  • guiri -

    Replied to the thread Fixture builder...mal wieder Prisma Rotation.

    Post
    Hey Rex, thanks a lot. I know, you did a lot of work!!!!! Very nice work. With the Prism spin it is crazy, one time I made it work perfectly in the simulation, but then, after changing gobo numbers to real gobos it disapeared. Got no idea why. The MAC…
  • Rex -

    Replied to the thread Fixture builder...mal wieder Prisma Rotation.

    Post
    Here's how I 'think' it should be written to visualize... I 'think' why you can't visualize the 'rotation' is because of 2 subattributes on the same attribute? But you can visualize Gobo and GoboWheel Spin within the same attribute, so I got nothing…
  • Rex -

    Replied to the thread Fixture builder...mal wieder Prisma Rotation.

    Post
    Here ya go...give this a try. Very Quick and Dirty. Got everything to visualize excepting Prism1_Rot?? Every time I call it up with the console, the multiple beams snap back into a single?!? Tried giving each one it's own Subattribute but no…
  • Rex -

    Replied to the thread Fixture builder...mal wieder Prisma Rotation.

    Post
    There is a difference in the way MA2 writes profiles and the way the FixtureBuilder writes profiles....unfortunately.
  • guiri -

    Replied to the thread Fixture builder...mal wieder Prisma Rotation.

    Post
    Now it workes!!! Jetzt funktioniert es. I did the fixture again, but this time, instead of the Fixture Builder, with MA2onPC.< Diesmal mit der MA2onPC Software statt mit dem Fixture Builder. Thanx a lot!!!!! Short luck. Prism worked,....just reopend…
  • guiri -

    Replied to the thread Fixture builder...mal wieder Prisma Rotation.

    Post
    Thanks a lot. I am totaly new to XML Codes, I did it always with the fixture builder. Where do I get the DMX_24 values from? And what is it?
  • Rex -

    Replied to the thread Fixture builder...mal wieder Prisma Rotation.

    Post
    Source Code (53 lines)This seems to be a more accurate DMX chart to build a fixture from...cheers! Rex
  • Rex -

    Replied to the thread Fixture builder...mal wieder Prisma Rotation.

    Post
    XML Source Code (16 lines)This may be how your fixture needs to be set up in the way of a 'SHUTTER / DIM' ......to follow the DMX chart.
  • guiri -

    Replied to the thread Fixture builder...mal wieder Prisma Rotation.

    Post
    Ich hänge mal das Fixture in den Anhang, vielleicht hat jemand eine Idee. Immer noch folgendes Problem: Kanal 7 ist Effektkanal mit Prisma, es ist ein kombinierter Kanal mit Prisma Off, Prisma On und Prisma Rotation. (Canal 7 is my problem, it is a…
  • guiri -

    Replied to the thread Fixture builder...mal wieder Prisma Rotation.

    Post
    Hey Rex, thanx for the answer, but stil no succes. I tried to do a sipmle example. DMX 1-128 = Prism, form DMX 129-255 = Prism rotation. Well, in the simulation, the prism is there till DMX 128, then, from 129 to 255 it disappears. Even rebuilding the…
  • Rex -

    Replied to the thread Fixture builder...mal wieder Prisma Rotation.

    Post
    Well ... Visualizations in dot2 3D are created from the 'SUBATTRIBUTES' of 'ATTRIBUTES' in the profile and the PHYS FROM and PHYS TO entry fields. There are only a few 'keywords' that function as a SUBATTRIBUTES in dot2 3D and they must be Exactly named,…
  • guiri -

    Replied to the thread SMART SHOW ARTNET.

    Post
    Eigene Antwort: Scheint ohne Hilfprogramm nicht zu funktionieren. Per Loopback ananderes Programm und von dort aus durchschleifen und zum Interface senden, das klappt.
  • guiri -

    Replied to the thread Fixture builder...mal wieder Prisma Rotation.

    Post
    Frustration. Habe jetzt ein Test Fixture im Fíxturebuilder gebaut und die Werte eines bestehenden und funktionierenden Fixtures (MAC250) 1 zu 1 im Fixterbuilder übernommen....es funktioniert nicht.
  • tony -

    Replied to the thread MA Fixturebuilder.

    Post
    Hallo Andre Danke für deine Antwort. Versuche mich durch den Code zu wursteln.