Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • qr123de -

    Replied to the thread Dot2 onPC, Bome and APC20.

    Post
    Quote from Karemort: “Quote from qr123de: “Quote from Karemort: “Bomac works until I start the Artnet to DMX Software. ” Per IP address a software can open a ports. Each port can open only once per IP. I ” My loopback adapter is running om…
  • Lars -

    Replied to the thread Only tilt.

    Post
    If you want to have the dimmer open all the time then you can activate the dimmer value and store it on a separate executor or simply the same one you've used for your effect. Cheers, Lars
  • Lars -

    Replied to the thread Problem mit Dimmer auf Fader und anderes.

    Post
    Moin, also zu deinem ersten Punkt muss ich sagen habe ich so irgendwie keine richtige Idee... Kannst du uns sagen welche Art von Fixture Ihr verwendet habt? Oder noch besser kannst du uns deine Show an support@ma-dot2.com schicken? :) zu 2. Schau dir mal…
  • nrdrei -

    Posted the thread Problem mit Dimmer auf Fader und anderes.

    Thread
    Hallo, wir haben die dot2 noch nicht lange und sind auch nicht sehr MA erprobt. Vorher hatten wir nur Hogs bei uns. Deswegen hier nun drei Fragen, in der Hoffnung, es gibt hier jemanden, der uns weiterhelfen kann. 1. Wir hatten die Tage eine Show bei…
  • Adinatha -

    Replied to the thread Only tilt.

    Post
    It works, but i forgot to mention that all the fixtures need to be at full. Now there's a still dimmer function on. So I have stored the tilt max position on an execute button, and when pressed the fixtures move to that position. maybe not the nicest…
  • Lars -

    Replied to the thread Only tilt.

    Post
    The only thing you need to do is to set the phase to zero and choose center- and size value so that the fixtures move from straight down to the tilt value you like! DONE! :thumbup: :D
  • Adinatha -

    Posted the thread Only tilt.

    Thread
    I'm beginning to learn the MA Dot2, and creating a show. One thing a really want is to tilt some expolites all at the same time. I can only select a Tilt/sinus and a dim/tilt. But that's not what i want. No effect, expo's fully on and all together tilt…
  • Karemort -

    Replied to the thread Dot2 onPC, Bome and APC20.

    Post
    Quote from qr123de: “Quote from Karemort: “Bomac works until I start the Artnet to DMX Software. ” Can you be more specific? Lets talk about TCP/IP and UDP/IP. Per IP address a software can open a ports. Each port can open only once per IP. If you…
  • qr123de -

    Replied to the thread Dot2 onPC, Bome and APC20.

    Post
    Quote from Karemort: “Bomac works until I start the Artnet to DMX Software. ” Can you be more specific? Lets talk about TCP/IP and UDP/IP. Per IP address a software can open a ports. Each port can open only once per IP. If you are now running…
  • qr123de -

    Replied to the thread Smart Show Node won't Connect To MA Dot 2.

    Post
    Have you corrected the IP as Lars asked for? In that dot2 screen shot you can see 192.168. *0* .2 Maybe a restart was missing here? In the adapter setting you entered 192.168. *1*. 2 - which is correct because the node is also in 192.168.1.x. there is…
  • Lars -

    Replied to the thread How to Import effect?.

    Post
    Hey @ohbalin, it is not possible to import any effects into the dot2 software. You can create custom effects with the help of the internal predfined effects and store them as presets into the corresponding preset pool. These effect presets can be used…
  • BrandyA -

    Replied to the thread dot2 Tips + Tricks special - 1.3.1.4 general informations.

    Post
    Thanks for the tip with the tempfader ! But all I found to do is an empty cue with a CMD like "stomp effect 1 thru 21", I can't just store when I stomp an effect, or I'm missing something... And I have an another issue (which is maybe not one) when I…
  • ohbalin -

    Posted the thread How to Import effect?.

    Thread
    How to Import effect? please :) :) :) :) :)
  • Lars -

    Replied to the thread External DMX.

    Post
    Hey, unfortunately this is not possible...to control a cue you need to store it first. A direct access to DMX channel of the console is also not possible. Sorry! Lars
  • Lighthouse -

    Liked dangerousben’s post in the thread Stairville Pixel Beam 160 RGBW 16x10W.

    Like (Post)
    Kleiner Nachtrag: Eigentlich sollten an Stelle der Pixel Beams die Showtec Phantom Matrix FX verbaut werden, welche dann aber wegen der Baugröße leider ausscheiden mussten. Die Lampe ist vergleichbar und preislich ähnlich attraktiv.
  • Lighthouse -

    Liked dangerousben’s post in the thread Stairville Pixel Beam 160 RGBW 16x10W.

    Like (Post)
    Ja, ich hatte das Gleiche am Dienstag auch gebaut, mich hat's aber mit Grippe bis heute ausgeklinkt. Ich wollte es gerade hochladen und habe es dann gesehen. Die Lampen sind in Ordnung. Ich betreibe die mit MAOnPC. In dem Laden in dem sie hängen dienen…
  • JanLightguy -

    Replied to the thread dot2 Tips + Tricks special - 1.3.1.4 general informations.

    Post
    @BrandyA yes you can. And of you Store it on a Fader and assign the Fader to a Tempfader you can fade out the FX
  • Karemort -

    Replied to the thread Dot2 onPC, Bome and APC20.

    Post
    Bomac works until I start the Artnet to DMX Software.
  • Thierry -

    Replied to the thread Color Wheel Snap.

    Post
    If you edit the cue you can set the "color fade" to 0
  • sam -

    Posted the thread Color Wheel Snap.

    Thread
    How do I make a fixture with a color wheel ignore fade times and always snap to color position? I can change the color time to 0 in the cue but that makes all the LED/CMY fixtures snap as well. I'm new to dot 2 and all other consoles I've ever used just…