Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Callum_Jack -

    Replied to the thread Smart Show Node won't Connect To MA Dot 2.

    Post
    Hi, My Firewall was active and I have now disabled this, However sill no luck with connecting my node to Dot 2. I tried pinging the node and it came back fine with no packets lost. So the node is working fine I also changed it back to DCHP but that…
  • Lars -

    Liked Callum_Jack’s post in the thread Smart Show Node won't Connect To MA Dot 2.

    Like (Post)
    Ok I’ll try that And see where it gets me thanks for all your help I’ll get back to you on how I goes.
  • Callum_Jack -

    Replied to the thread Smart Show Node won't Connect To MA Dot 2.

    Post
    Ok I’ll try that And see where it gets me thanks for all your help I’ll get back to you on how I goes.
  • Lars -

    Replied to the thread Smart Show Node won't Connect To MA Dot 2.

    Post
    Quote from Callum_Jack: “When you say advance settings do you mean in MA Dot2 or on Windows ?? And could you let me know how I can access these settings ?? I have also tried the SetIP command if that’s what you mean but that just didn’t work when…
  • Lars -

    Replied to the thread Make the "High Value" set as a tempfader so you can fade in dim effects.

    Post
    The easiest way is to store the effect either on button executor or on executor fader. Then you can use the dedicated fade and off times or the master fader. If you want to limit the output of an effect preset, which is running in the programmer, than…
  • Callum_Jack -

    Replied to the thread Smart Show Node won't Connect To MA Dot 2.

    Post
    My mistake I get what you mean. This is a mistake on my behalf but even when changing the IP address to 192.168.1.2 I still have no luck ?
  • Callum_Jack -

    Replied to the thread Smart Show Node won't Connect To MA Dot 2.

    Post
    Hi, When you say advance settings do you mean in MA Dot2 or on Windows ?? And could you let me know how I can access these settings ?? I have also tried the SetIP command if that’s what you mean but that just didn’t work when I run the command Thanks
  • Lars -

    Replied to the thread Smart Show Node won't Connect To MA Dot 2.

    Post
    Hi Jack, on the last picture you've uploaded we can see that the onPC is using 192.168.0.2 as sACN adress. The node uses 192.168.1.201. With this configuration the devices can't talk to each other. Please check, if there are any additional IP adresses…
  • tobinpls -

    Posted the thread Make the "High Value" set as a tempfader so you can fade in dim effects.

    Thread
    I love using soft dim and hard dim effects, the only issue is they're either full on or full off, Is there a way to link the "High Value" of a dim effects preset to a temp/intensity fader so that I can slowly fade in the intensity of the dim effect?…
  • Karemort -

    Replied to the thread dot2 onPC Multi Monitor Setup.

    Post
    «works great even got the knob on apc20 to scroll through wing screens smile.png« How did you do that?
  • Callum_Jack -

    Posted the thread Smart Show Node won't Connect To MA Dot 2.

    Thread
    Hi All, Have just bought a new ArtNet/sACN(E1.31) node it's a Smart Show NetDMX. This is the link to the exact node smartshow.lighting/netdmx/ I was under the impression that this node should work with GrandMA Dot 2 as it's on a PDF I found about how…
  • Thierry -

    Liked Thierry’s post in the thread RDM? :).

    Like (Post)
    " It is also about managing distant fixture from the console (for example: adressing fixtures, changing fixture mode, etc...)." That is the main purpose of RDM and one of the last development about dmx. Every new great fixture come to the market with…
  • dangerousben -

    Replied to the thread Stairville Pixel Beam 160 RGBW 16x10W.

    Post
    Moin, ich habe morgen 4 von denen und seh mal ob dich das mit der OnPC an den Start bekomme. Wenn's läuft lade ich den Krempel auf MA Share.
  • Lighthouse -

    Liked Lars’s post in the thread Fixture Builder Tutorials.

    Like (Post)
    Moin Moin! Ich habe die Tutorials für den Fixture Builder auch noch mal in deutsch gemacht. :) Im ersten Video geht es um die Basisfunktionen. youtube.com/watch?v=yEw7Bncbn3…gMaILq47FDKY2kBnaDtr5LRMA Im zweiten Tutorialvideo geht es dann um den Import…
  • Lighthouse -

    Replied to the thread Stairville Pixel Beam 160 RGBW 16x10W.

    Post
    HI, Leider nein werde wohl warten müssen bis ich das Gerät hier habe und selbst eins machen
  • Anderson86 -

    Posted the thread Robe Viva cmy and Robe parfect 150.

    Thread
    Hey. Please create the given devices Robe Robin Viva CMY and Robe Robin Parfeсt 150. Both for the console Dot 2 and for Dot2 3D. When to wait for ready-made appliances? Thank you.
  • Yaneck -

    Liked Lars’s post in the thread dot2 3D.

    Like (Post)
    Yes, this is possible, but only as PNG. With the shortcut CTRL+P you can create a simple screenshot from the view which you've actually selected. I guess with some software tools you can also convert it as PDF... Cheers, lars
  • Lars -

    Replied to the thread dot2 3D.

    Post
    Yes, this is possible, but only as PNG. With the shortcut CTRL+P you can create a simple screenshot from the view which you've actually selected. I guess with some software tools you can also convert it as PDF... Cheers, lars
  • Yaneck -

    Replied to the thread dot2 3D.

    Post
    Thanks Lars! Other little question (as I've never tried it before): is it possible to export the stageview 2d into a printable PDF to use as a stage blueprint?
  • Yaneck -

    Liked Lars’s post in the thread dot2 3D.

    Like (Post)
    Hey Yaneck, we don't have any reports about issues with .3ds imports. So I assume that the import works as expected! ;) In this part of the manual you can read more about .3ds files and the importer: