Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Lars -

    Replied to the thread SACN Priority.

    Post
    This is unfortunetly not possible...the dot2 uses always 100 as its priority for sACN. I will add this request to our wishlist. Cheers, Lars
  • astandera -

    Replied to the thread SACN Priority.

    Post
    Hi, be only aware of that the desk with higher sACN priority does not take control in the meaning of dmx merging, so, I thing, the physical disconnecting the second console could be the most simple way. But you probably need to swop desks from your desk…
  • Lars -

    Replied to the thread Chauvet Intimidator Spot 260.

    Post
    Hi, you can export the file from the dot2 software then it is an unprotected xml file. I've done this for you and attached it to this message. Please keep in mind that this file is only usable in the dot2 version 1.5 Cheers, Lars
  • Lars -

    Replied to the thread dot2 onPC Multi Monitor Setup (part 2).

    Post
    Hey @chriseow, the dot2 onPC is one huge window which can be expandet to the second screen, but not as a second window. So if you extend your desktop to the second screen you should be able to pull the window bigger and adjust it to the space which is…
  • dlambryc -

    Posted the thread Chauvet Intimidator Spot 260.

    Thread
    Hello, I am trying to use the Fixture Builder to build a patch for the Chauvet Intimidator Spot 260. I am having difficulty understanding how to specify the Tile/Pan fine adjustment, the gobo wheel's attributes, the functions, and movement macros. The…
  • chriseow -

    Posted the thread dot2 onPC Multi Monitor Setup (part 2).

    Thread
    Hi, there is a previous thread on this issue but no solution was offered. dot2 onPC Multi Monitor Setup So I am trying my luck again. Does Dot2 on PC supports output of the Dot2 on PC software to a 2nd monitor? I am using a Dell AIO but would love it if…
  • Spacelord09 -

    Replied to the thread Dot2 Auflösung 1280x1024 nicht genutzter Platz..

    Post
  • Hi everybody! Today we have the honour to announce the release of the new 1.5.0.2 software version for dot2! See, what this version includes, get some t & t about how to install and what one of the new functions (Solo) does! Cheers Cheers, Qincy
  • Michael -

    Liked nasula’s post in the thread dot2 Tips+Tricks No.49 [EN] the new 1.5.0.2 software version is out!.

    Like (Post)
    So let's start testing :)
  • Cburkholder -

    Posted the thread SACN Priority.

    Thread
    I have had an issue where I have attempted to connect a dot 2 to an existing house where the existing SACN control device is set at 100(have used other desks in this space with no issue using priority over 100). Is it possible to change the SACN priority…
  • nasula -

    Replied to the thread dot2 Tips+Tricks No.49 [EN] the new 1.5.0.2 software version is out!.

    Post
    So let's start testing :)
  • nasula -

    Liked Michael’s post in the thread dot2 Tips+Tricks No.49 [EN] the new 1.5.0.2 software version is out!.

    Like (Post)
    Hi everybody! Today we have the honour to announce the release of the new 1.5.0.2 software version for dot2! See, what this version includes, get some t & t about how to install and what one of the new functions (Solo) does! Cheers Cheers, Qincy
  • Hallo zusammen! Heute dürfen wir Euch stolz, die neue 1.5.0.2 dot2 Software Version präsentieren! :thumbup: Schaut Euch an, was diese Version beinhaltet, holt Euch Informationen, wie sie installiert wird und lasst Euch eine der Neuigkeiten (die Solo Funktion)…
  • Michael -

    Posted the thread dot2 Tips+Tricks No.49 [EN] the new 1.5.0.2 software version is out!.

    Thread
    Hi everybody! Today we have the honour to announce the release of the new 1.5.0.2 software version for dot2! See, what this version includes, get some t & t about how to install and what one of the new functions (Solo) does! Cheers Cheers, Qincy
  • MayanBlue -

    Replied to the thread Cue Start durch Fader verhindern.

    Post
    Quote from Lars: “ Leider ist das kaskadieren von Nodes, zur Parameter-Erweiterung, in der dot2 Welt nicht vorgesehen. Bei 1024 Parametern ist also leider Schluss für den onPC. ” Schade, ich persönlich denke, dass das bei vielen Kunden einen Kauf…
  • MayanBlue -

    Replied to the thread CUE-Liste invertieren.

    Post
    Hallo Lars, Quote from Lars: “Hi, also ich habe mir das angesehen und das Problem liegt in der Tat im Tracking. Allerdings macht die Konsole hier nicht wirklich etwas falsch. Das Tracking rückwärts vom ersten auf den letzten Cue bzw. das…
  • Lars -

    Replied to the thread CUE-Liste invertieren.

    Post
    Hi, also ich habe mir das angesehen und das Problem liegt in der Tat im Tracking. Allerdings macht die Konsole hier nicht wirklich etwas falsch. Das Tracking rückwärts vom ersten auf den letzten Cue bzw. das rückwärtslaufen durch die Cue Liste mit…
  • Lars -

    Replied to the thread Cue Start durch Fader verhindern.

    Post
    Guten Morgen Marc, Das Stoppen eines Executors beim runterziehen des Faders kannst du heute schon in den Executor Einstellungen abschalten. Guck einfach mal nach der Funktion "Autostop". In der kommenden Version wird es dann aber auch eine "Autostart"…
  • guiri -

    Posted the thread Cue Start durch Fader verhindern.

    Thread
    Erstmal "Hallo" an alle. Freu mich jetzt auch aktiv im Forum zu werden. Ich selbst benutze die onPC mit Dot2 node4(1k). Frage: Kann ich irgendwie die Executor so einstellen, dass die Cues nicht mit einer Faderbewegung gestartet werde? Folgendes Szenario:…
  • nasula -

    Replied to the thread "Select several at a time" working with commands and ....

    Post
    Hello Astander Thank you for your answer. As for the first question, the command in the style - "Off exec 1.205;" - means with a semicolon at the end. Cool. As for the second question, the command "move DmxUniverse x at y" also works according to my…