MA dot2 Forum

This is about the new dot2.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Unread Threads

Topic Replies Last Reply

Smart Show Node won't Connect To MA Dot 2

9

Callum_Jack

Issue with strobe on Fixture Builder v1.3

0

Stairville Pixel Beam 160 RGBW 16x10W

7

dangerousben

dot2 Tipps+Tricks Nr.43 [DE] Fixture Typen Default Werte tauschen

0

dot2 Tips+Tricks No.43 [EN] Changing Fixture types defaults

0

Recent Activities

  • Callum_Jack -

    Replied to the thread Smart Show Node won't Connect To MA Dot 2.

    Post
    Quote from qr123de: “Crossover ethernet cable are not required (anymore). if you have a 1gb network adapter. The adapter can handle direct links himself. Crossover cables are from the past ;) ” I have tried it both with and without a cross over cable…
  • Nightscribe -

    Liked Michael’s post in the thread dot2 Tips+Tricks No.43 [EN] Changing Fixture types defaults.

    Like (Post)
    Hi there, Welcome to our first Tips & Tricks clip in 2018! We received some questions about the behavior of Fixtures and how to change it. In our example, we change the default Zoom angle as well as the default Tilt position of a fixture and Change the…
  • BrandyA -

    Posted the thread Issue with strobe on Fixture Builder v1.3.

    Thread
    Hi there, I'm trying to create a Cameo Studio Mini PAR TRI 3W, with 6 dmx channels (Dimmer, R, G, B, Macro, Strobe). I have an issue with creating a strobe attribute in the new version 1.3.2.2 of Fixture Builder. If I set my 6th dmx channel at…
  • dangerousben -

    Replied to the thread Stairville Pixel Beam 160 RGBW 16x10W.

    Post
    Kleiner Nachtrag: Eigentlich sollten an Stelle der Pixel Beams die Showtec Phantom Matrix FX verbaut werden, welche dann aber wegen der Baugröße leider ausscheiden mussten. Die Lampe ist vergleichbar und preislich ähnlich attraktiv.
  • Markus Janning -

    Posted the thread dot2 Tipps+Tricks Nr.43 [DE] Fixture Typen Default Werte tauschen.

    Thread
    Hallo zusammen, willkommen zu unserem ersten Tipps & Tricks Videoclip 2018! Wir erhielten einige Anfragen über das Grundverhalten von Fixtures und wie man das ändern kann- also haben wir einen Clip darüber gemacht. In unserem kleinen Beispiel ändern…
  • Michael -

    Posted the thread dot2 Tips+Tricks No.43 [EN] Changing Fixture types defaults.

    Thread
    Hi there, Welcome to our first Tips & Tricks clip in 2018! We received some questions about the behavior of Fixtures and how to change it. In our example, we change the default Zoom angle as well as the default Tilt position of a fixture and Change the…
  • dangerousben -

    Replied to the thread Stairville Pixel Beam 160 RGBW 16x10W.

    Post
    Ja, ich hatte das Gleiche am Dienstag auch gebaut, mich hat's aber mit Grippe bis heute ausgeklinkt. Ich wollte es gerade hochladen und habe es dann gesehen. Die Lampen sind in Ordnung. Ich betreibe die mit MAOnPC. In dem Laden in dem sie hängen dienen…
  • qr123de -

    Replied to the thread Dot2 onPC, Bome and APC20.

    Post
    Quote from Karemort: “I have now made two presets so now it works. But with midi I am a little short on note, 128 is max with midi. So I was playing with BOMAC, but cannot get it to work at the same time as the ArtNet to DMX software is running, since…
  • Michael -

    Replied to the thread Make the "High Value" set as a tempfader so you can fade in dim effects.

    Post
    Sorry to pop into your conversation, but: Groupmasters have a high priority and they work on the fixtures, so as a workaround, you could use Groupmasters to limit fixtures that run effects on buttonexecutors. Another workaround to limit buttonexecutors…
  • Karemort -

    Replied to the thread Dot2 onPC, Bome and APC20.

    Post
    I have now made two presets so now it works. But with midi I am a little short on note, 128 is max with midi. So I was playing with BOMAC, but cannot get it to work at the same time as the ArtNet to DMX software is running, since I use a ENTTEC usb-dmx…